Line-Side Kitting
Lowe are CE Accredited
Lowe are one of the very few stillage manufactures within Europe that have been accredited with CE marking, BS EN ISO 8611-3:2012, BS EN ISO 445:2013 and ISO 9001 2015.
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
Are You Prepared For A HSE Random Inspection?
We are one of the very few stillage manufactures within Europe that have been accredited with CE marking, Call our team today, we carry out site visits and ensure you material handling is compliant and within current regulations.
What sets us apart from competitors?
Problem Solving
Firstly, over many years we have worked closely with our clients in providing solutions to their complex material handling storage/trolley etc. requirements. Problem solving is our strength, whatever the issue we can provide a solution.
Design
Lowe deliver a complete solution to your material handling requirements. From your initial concept, we produce a detailed 3D design, working with you all the way through the design process, until reaching an agreed drawing.
Manufacture/Production
Our purpose-built production facility is based in the heart of Staffordshire. We custom build every fabrication, taking the steel from its rawest state straight through to a high-quality product. Our fabrications are built by skilled engineers to last. During every stage of the production process our products are inspected to ensure the highest standards.
Long Term Relationships
We pride ourselves not only on just providing the perfect product/ solution, but the relationship that we have with our customers for the foreseeable future. If you have any issues or problems that need solving further down the line, we will always be here to assist.
Type | Standard | Details |
Dynamo | BS 4278 | The Dynamo eyebolt is commonly used in maintenance applications i.e. for lifting a motor
They are only designed for axial loading due to the small collar and ring cross section |
Collard Eyebolt | BS 4278 | The collard eye bolt is the general-purpose eyebolt used in a wide variety of applications
The large collar and ring cross section means this eyebolt is suited to both axial and angular loading, providing the eye is aligned to the direction of pull
The size of the eye is often a restriction and commonly required a shackle to aid lifting |
Eyebolt with link | BS 4278 | The Eyebolt with link is used where the eye of the collard eye bolt is to small to get a hook through
The compact eye and the link allow the eyebolt with link to be loaded in any direction providing more versatility |
Collar eyebolt with Welded Link | BS 4278 | Collar eyebolt with welded link serves the same purpose as the eyebolt with link allowing for loading in any direction
However, it only has the same lift capacity ratings as the standard collard eyebolt |
DIN 580 Eye Bolt | DIN 580 | The DIN 580 eye bolt are primarily intended as permanent attachments on equipment such as motors, control cabinets, gear boxes, etc. for their transport
If used as temporary attachments the next largest size should be selected from that specified.
Side pull or Shear Loading must be avoided, and load bearing capacity is only good to pull angled ≤45° |
Customers we have worked with
brands
